TFT LCD RFQ Checklist: What to Send Your Display Supplier

A useful TFT LCD RFQ gives suppliers enough information to quote the same deliverable, test conditions, and production assumptions. Send a controlled requirements package rather than only a diagonal size and target price. Separate mandatory requirements from preferences so suppliers can propose feasible alternatives.
Define the Product Before the Part Number
Describe the device, user task, viewing distance, lighting, expected daily use, and installation orientation. A wall control and a handheld instrument may use the same panel size but need different brightness, touch behavior, and mechanical protection.
If standard modules cannot meet the enclosure or front-surface requirements, review custom TFT display modules for consumer devices before freezing the request. Identify which layers need customization and which can remain standard.
The RFQ Package
| Area | Information to provide | Decision it supports |
|---|---|---|
| Display | Diagonal, resolution, orientation, panel mode | Panel shortlist |
| Optics | Finished-stack luminance, viewing geometry, contrast needs | Backlight and front stack |
| Host | Processor, available interface, voltage, driver constraints | Electrical compatibility |
| Mechanics | Drawing, datums, envelope, mounting, FPC exit | Fit and assembly |
| Touch | Gloves, liquids, cover thickness, required gestures | Sensor and controller |
| Environment | Operating/storage conditions, cleaning, sunlight | Materials and validation |
| Commercial | Prototype quantity, annual forecast, release schedule | Capacity and quotation |
| Quality | Acceptance limits, traceability, change notification | Production agreement |
Attach revision identifiers to every drawing and specification. State which document takes precedence if two requirements disagree. Use the datasheet reading guide to distinguish typical performance from guaranteed limits.
Specify Measurable Optical Requirements
“High brightness” is incomplete. Define where luminance is measured, whether the touch panel and cover are included, the drive setting, temperature, stabilization, and minimum acceptable result. Ask the supplier to identify deviations rather than silently quoting a bare LCD value.
Outdoor visibility depends on reflection and viewing geometry as well as luminance. Link the requirement to actual tasks described in the sunlight-readable display guide. For touch, list actual glove models and relevant wet conditions instead of relying on a generic glove-mode claim.
Describe Customization Precisely
A changed cover lens, FPC, backlight, or complete panel design represents a different scope. The Newhaven custom-display overview illustrates several customization categories. Use those categories to ask what is standard, modified, or newly tooled in a particular proposal.
Do not assume a custom FPC can freely remap every signal without affecting routing or assembly. Request a reviewed pinout and connector definition. Provide host-side mating details, cable orientation, and the intended assembly sequence.
Ask for a Comparable Commercial Breakdown
Request unit prices by defined order quantity, sample charges, engineering charges, tooling, test fixtures, and logistics assumptions. Ask whether tooling is owned by the buyer, who maintains it, and whether it can be transferred. A low unit price is difficult to evaluate if essential testing is excluded.
For example, two hypothetical quotations may differ because one includes bonded cover glass and touch tuning while the other supplies an unbonded LCD. Normalize the deliverable before comparing totals. Use the MOQ and NRE guide to structure the comparison; avoid treating an annual forecast as a binding order unless that is expressly agreed.
Define Qualification and Production Acceptance
Request samples with a documented build configuration. Agree which tests belong to design qualification and which will be repeated during production or incoming inspection. Ask for test conditions and acceptance limits, not only a declaration that samples passed.
Record controller firmware, touch configuration, optical materials, and module revision. Specify notification expectations for component, process, and manufacturing-location changes. Ask about supply continuity and alternatives without assuming that a same-size replacement is interchangeable.
A Release Checklist
Before sending the RFQ, confirm that the package has one owner, a revision date, requirements with units, an enclosure drawing, host details, quantities, and a schedule. Include a response matrix with columns for compliant, deviation, evidence, and commercial impact.
After receiving responses, close open questions in writing and issue a consolidated revision. The final approved sample and drawing should describe the same build as the quotation. This reduces the chance that an attractive prototype becomes a materially different production assembly.
Hero image: AI-generated editorial illustration.
Frequently Asked Questions
What should a TFT RFQ include?
Include product use, display requirements, host interface, drawings, environment, quality criteria, quantities, and schedule.
Should an RFQ state typical or minimum brightness?
State the required minimum and measurement conditions, including whether the final cover and touch stack are included.
Are prototype and production prices comparable?
Only after normalizing the build configuration, test scope, quantities, and one-time charges.
